Spacelabs 90385 Moniter Power Supply Battery Replacement
This unit is a fully rechargeable 12 volt, 0.80 amp hour SLA Battery Replacement for the Spacelabs 90385 Moniter Power Supply.
Spacelabs 90385 Moniter Power Supply Specifications:
- Rechargeable, FDA Approved
- Chemistry: SLA
- Terminal: Plug End
- Voltage: 12
- Capacity: 0.80 amp hour
- Height (w/terminal): 2.44"
- Lenght: 3.78"
- Width: 0.98"
- Weight: .77 LBS
Cycle Applications: Limit initial current to 240mA. Charge until PS-1208 voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 8mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of the PS-1208 battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.
Do you have a question? You can contact us online or toll free at 1-877-775-4381 to talk to a battery specialist today.
The Spacelabs 90385 Moniter Power Supply Battery is a 12 volt / 2.3 Amp rechargeable unit for usage with the Spacelabs 90385 Moniter Power Supply.
