Power-Sonic PS-121100 Battery - 12V 110AH

The Power-Sonic PS-121100 battery is power-sonic's standard version of a 12v 110ah battery that is completely seal and maintenance free.

PowerSonic PS-121100 Battery Specifications:
Voltage: 12
Capacity: 110 amp hour
Terminal: T11
Height (w/terminal): 8.66"
Length: 13.00"
Width: 6.73"
Weight: 69.50 Lbs

Cycle Applications: Limit initial current to 20A. Charge until PS-121100 voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 1.1A. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.

“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.

Note: Due to the self-discharge characteristics of the PS-121100 battery , it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.