24 Volt 8.0 Amp Battery Charger (XLR) AGM / GEL
The 24 Volt 8.0 Amp battery charger is manufactured by UPG, and comes standard with the 3-Pin series XLR plug. This charger is meant for use with AGM and GEL batteries that have a rating of 26 - 80 amp hours. The 24 Volt 8.0 amp battery charger features an LED status indication system that allows you to visually monitor your batteries state of charge.
24 Volt 8.0 Amp Battery Charger Specifics:
- For Use With: 24 volt electric / mobility scooters equipped with an off-board female XLR socket
- Type of Charger: 3 - Stage Switch (AGM & GEL) Mode Fan Cooled Charger
- Charging Current: 8.0 Amp
- UPG #71714
Input Voltage | 100VAC - 240VAC |
Input Current | 4.0 A Max. @ 120 VAC |
Input Frequency | 47 - 63 Hz |
Output Voltage | Bulk Charge: 29.4VDC +/- 0.2VDC Float Charge: 27.4VDC +/- 0.2VDC |
Output Current | Bulk Charge: 8A +/- 0.5A Float Charge: N/A |
Over-Voltage Protection | (>) 30VDC |
Over-Current Protection | (>) 8 ADC |
Input Power (Watts) | 480 Watts |
Input Standby Power (Watts) | (<) 5.5 Watts |
Efficiency | 85% |
Battery Size Range | 26 AH - 80 AH |
Dielectric Withstand Voltage | Primary to Case: DC2121 V rms, 3.5mA, for one minute Primary to Secondary: DC4242 V rms, 3.5 mA, for one minute |
Operating Temperature | 0°C~+40°C |
Storage Temperature | -10° C~+80°C |
Connector | 3 Pin D (XLR), Pin 1 (+) / Pin 2 & 3 (Ground) |
Standards | UL1012, CUL, FCC Part 15 - Class B, C-Tick, Certified as Wheelchair Charger, CE, CB, GS, SAA |
Weight | 4 LBS |