24 Volt 5.0 Amp Battery Charger (XLR)
The 24 Volt 5.0 Amp battery charger is manufactured by UPG, and comes standard with the 3-Pin series XLR plug. This charger is meant for use with Gel Sealed Lead Acid batteries that have a rating of 12 - 50 amp hours. The 24 Volt 5.0 amp battery charger features an LED status indication system that allows you to visually monitor your batteries state of charge.
24 Volt 5.0 Amp Battery Charger Specifics:
- For Use With: 24 volt electric / mobility scooters equipped with an offboard female XLR socket
- Type of Charger: 3 - Stage Switch Mode Fan Cooled Charger
- Charging Current: 5.0 Amp
- Charger Specifications PDF
The 24 Volt 5.0 Amp battery charger is manufactured by UPG, and comes standard with the 3-Pin series XLR plug. This charger is meant for use with GEL sealed lead acid batteries that have a rating of 12 - 50 amp hours. The 24 Volt 5.0 amp battery charger features an LED status indication system that allows you to visually monitor your batteries state of charge.
| Input Voltage | 100VAC - 240VAC |
| Input Frequency | 50Hz - 60Hz |
| Output Voltage | Bulk Charge: 29.4VDC +/- 0.5VDC Float Charge: 27.4VDC +/- 0.5VDC |
| Output Current | Bulk Charge: 5A +/- 0.5A Float Charge: (<) 1.2A |
| Over-Voltage Protection | (>) 30VDC |
| Over-Current Protection | (>) 5.5A |
| Low Voltage Turn-On | (>) 16VDC + 2V |
| Input Power (Watts) | (<) 180 Watts |
| Input Standby Power (Watts) | (<) 8 Watts |
| Efficiency | 80% at Full Load |
| Battery Size Range | 12 AH - 50 AH |
| Dielectric Withstand Voltage | 2.1KV for 1 min. @ 3.5mA, Input to Output |
| Operating Temperature | -10°C~+40°C |
| Storage Temperature | -10° C~+80°C |
| Housing Protection | N/A |
| Connector | 3 Pin D (XLR), Pin 1 (+) / Pin 2 & 3 (Ground) |
| Standards | UL1012, CUL, FCC Part 15 - Class B Certified as Wheelchair Charger |
| Weight | 2 LBS |
